Have Questions?
The V-Twin 49-2413 18-inch Spring Fork Assembly is designed for use with a 7/8-inch neck and fits 1936–1945 Harley-Davidson WL models. This chrome-finished assembly replicates the stock-style units and features electrically welded and brazed construction. It accepts original-style components and accessories for a detailed replica appearance.
The fork assembly uses 45-style rockers mounted inside the fork legs and accepts a 3/8-inch-diameter axle. The rocker spacing is 6.5 inches. The rear-leg tubes are 1 inch and tapped 3/4-16 to accept a threaded riser bushing set, allowing use of a triple tree without ears and a choice of post riser set. The assembly also accepts a 3/4-inch axle for custom applications, and its 1-inch stem uses tapered bearings for ease of installation.
The top clamp, neck races and cone nut are not included, and some assembly may be required. The unit is unpolished at the rear fork stem cross plate and front spring fork rod forging. The listed fork measurement is 18 inches, measured from the triple-tree stem and lower-bearing location to the axle position. Builders should verify the required length and component requirements before installation.
Features:
- Brand and SKU: V-Twin 49-2413
- Fitment: Fits 1936–1945 Harley-Davidson WL models
- Finish: Chrome
- Fork Length: 18 inches
- Neck Compatibility: For use with a 7/8-inch neck
- Construction: Electrically welded and brazed construction
- Rockers: 45-style rockers mounted inside the fork legs
- Axle Acceptance: Accepts a 3/8-inch-diameter axle and a 3/4-inch axle for custom applications
- Rocker Spacing: 6.5 inches between the rockers
- Riser Preparation: Rear-leg tubes are tapped 3/4-16 for a threaded riser bushing set
- Stem: 1-inch stem designed for tapered bearings
- Included Components: Top clamp, neck races and cone nut are not included
- Assembly: Some assembly may be required
- Finish Detail: Unpolished at the rear fork stem cross plate and front spring fork rod forging
Fitment:
Harley Davidson WL 1936
Harley Davidson WL 1937
Harley Davidson WL 1938
Harley Davidson WL 1939
Harley Davidson WL 1940
Harley Davidson WL 1941
Harley Davidson WL 1942
Harley Davidson WL 1943
Harley Davidson WL 1944
Harley Davidson WL 1945
Harley Davidson WL 1946
Harley Davidson WL 1947
Harley Davidson WL 1948
Harley Davidson WL 1949
Harley Davidson WL 1950
Harley Davidson WL 1951
Harley Davidson WL 1952
| UOM: EA |
| Country Of Origin: TAIWAN |
| Suggested Items: 49-0235 - Rebuild Kit 13-1937 - Spring Fork Outer Springs 7706-2 - Cadmium Spring Rod Bushing |
| Accessory Items: 52-0758 - 18 inch x 2.15 inch Front Wheel Assembly 49-0062 - Fork Rocker Set Black 52-0757 - 16 inch x 3.00 inch Front Wheel Assembly 44-0453 - Wheel Hub Bearing Assembly Kit |
| Tech Notes: Unit is unpolished at the rear fork stem cross plate and at the front spring fork rod forging. *NOTE: 45inch Spring Fork rockers are mounted to the inside of the fork and utilize a 3/8inch axle. 45inch Servi-Cars 1947-1957 use Big Twin rockers on the outside of the fork. How we measure Spring Forks. NOTE: Measurement is from the triple tree where stem and lower bearing sits to the axle position. This is the effective length as it is the legnth from the lower bearing cup on the frame to axle. Installer can slide a pipe or solid bar thru the bearing cups and measure the length that may be needed for the desired frame height. This Spring Fork assembly accepts a 3/4inch axle for custom applications. As rockers are not offset (as on replica Spring Forks). 1inch stem utilized tapered bearings for ease of installation. |
| Measurement: Legnth: 18 inches |
