Have Questions?
The V-Twin 49-2466 Factory Sample 18-Inch Spring Fork Assembly Chrome is designed for applications with a 7/8-inch neck and fits the listed Harley-Davidson WL models from 1936 through 1952. This replica-style assembly features electrically welded and brazed construction and is intended to accept original-style components and accessories for a detailed replica appearance.
The 45 rockers mount inside the fork legs and accept a 3/8-inch-diameter axle. The rocker spacing is 6.5 inches, while the assembly accepts a 3/4-inch axle for custom applications. The rear-leg tubes are tapped 3/4-16 to accept a threaded riser bushing set, allowing use of a triple tree without ears and a choice of post riser set. The 1-inch stem uses tapered bearings for ease of installation.
This factory sample is a brand-new pre-production part that may have cosmetic imperfections, surface marks from installation testing, and unpolished areas at the rear fork stem cross plate and front spring fork rod forging. It has no stated physical defects such as cracks or holes. Top clamp, neck races, and cone nut are not included, and some assembly may be required. Check threaded and bearing holes for excess plating before installation. The stated spring fork measurement is 18 inches, measured from the triple tree bearing location to the axle position.
Features:
- Brand: V-Twin
- Part Number: 49-2466
- Application: Fits 1936, 1940-1941, 1942, 1944-1946, and 1949-1952 Harley-Davidson WL models listed by the manufacturer
- Neck Fitment: For use with a 7/8-inch neck
- Assembly Type: Factory sample 18-inch spring fork assembly with chrome finish
- Construction: Electrically welded and brazed replica-style construction
- Rockers: 45 rockers mount inside the fork legs and accept a 3/8-inch-diameter axle
- Rocker Spacing: 6.5 inches between the rockers
- Custom Axle Fitment: Accepts a 3/4-inch axle for custom applications
- Rear Leg Tubes: Tapped 3/4-16 for a threaded riser bushing set
- Stem: 1-inch stem with tapered bearings
- Installation: Some assembly may be required; check threaded and bearing holes for excess plating before installation
- Included Items: Top clamp, neck races, and cone nut are not included
- Factory Sample Condition: May have cosmetic imperfections, surface marks from installation testing, and unpolished areas; no cracks or holes are stated
Fitment:
Harley Davidson WL 1936
Harley Davidson WL 1937
Harley Davidson WL 1938
Harley Davidson WL 1939
Harley Davidson WL 1940
Harley Davidson WL 1941
Harley Davidson WL 1942
Harley Davidson WL 1943
Harley Davidson WL 1944
Harley Davidson WL 1945
Harley Davidson WL 1946
Harley Davidson WL 1947
Harley Davidson WL 1948
Harley Davidson WL 1949
Harley Davidson WL 1950
Harley Davidson WL 1951
Harley Davidson WL 1952
| UOM: EA |
| Country Of Origin: TAIWAN |
| Accessory Items: 49-2413 - 18 inch Spring Fork Assembly Chrome 49-2465 - Factory Sample 18 inch Inline Spring Fork Assembly Chrome 49-2460 - Factory Sample FXSTS Inline Spring Fork Assembly Black 49-2462 - Factory Sample FXSTS Inline Spring Fork Assembly Chrome |
| Tech Notes: *NOTE: We measure from the top of the rear leg (tube) to the front axle center line. Unit is unpolished at the rear fork stem cross plate and at the front spring fork rod forging. *NOTE: 45inch Spring Fork rockers are mounted to the inside of the fork and utilize a 3/8inch axle. 45inch Servi-Cars 1947-1957 use Big Twin rockers on the outside of the fork. How we measure Spring Forks. NOTE: Measurement is from the triple tree where stem and lower bearing sits to the axle position. This is the effective length as it is the legnth from the lower bearing cup on the frame to axle. Installer can slide a pipe or solid bar thru the bearing cups and measure the length that may be needed for the desired frame height. This Spring Fork assembly accepts a 3/4inch axle for custom applications. As rockers are not offset (as on replica Spring Forks). 1inch stem utilized tapered bearings for ease of installation. |
| Measurement: Legnth: 18 inches |
