Have Questions?
Generator alternator conversion kit replaces original generator and regulator. Compact high output alternator measures 3-1/4 inch long weighing only 3 lbs. The 2 short wires from the regulators go to alternator terminals long wire.
Kit includes black alternator and black regulator. Features high power output 17 amps @ 1000 rpms. Stronger than stock features billet housing for accurate alignment and a stress proof shaft. Alternators have 5/16 inch x 24 mount holes for screws. 13T drive gears are for all Big Twins and 14T is for all Sportsters! Kit can be used on 1957-1983 XL and 1941-1969 FL models if the generator bolt holes in cases are drilled to 5/16 inch-24. Use Helicoil kit to convert 12 volt generators with 5/16-24 thread to 1/4-24 thread to accept early mount bolt set. **NOTE: Black finned Regulator is not built-in and must be mounted remotely. Cannot be used with mini battery (12N55A-3B). *NOTE: Will require a 12 volt battery. Order mount screws gasket and gear kit for specific application. *NOTE: The outer cover with the large hex nut houses the rotor magnets which are encase in a stainless steel shell. This inchrotor inch turns when the engine is running.
Measurements: Threaded Thickness: .3 inches
Tech Notes: Suggested to use with #32-0983 Generator Gear Kit 14 Tooth on XL models. Suggested to use with #32-0204 13 Tooth Generator Gear Kit on Big Twin models. Suggested to use manufacturer replacement seal PHLE #TC1835. Suggested to use with #16-0920 Thread Repair Kit.
Instructions: http://www.vtwinmfg.com/Instructions/32/32-0371.pdf

