Have Questions?
D+D rigid frame is a basic starter frame featuring a 1-1/4 inch steel tubing with a 1-1/2 inch backbone 30 rake and 0 stretch for XL models with disc brakes.
Frame accepts the XL rigid oil tank and the oil tank battery mount kit and will require a custom 3/4 inch rear axle and mid control mounts. Spacers may be used that have 3/4 inch flats to fit the axle plates. Wheel adjuster blocks accept 3/4-24 screws. This frame does not include forward control mounts or cross shaft provision for mechanical brakes. Additional modifications such as weld mounts tabs brackets and provisions for rear mounting to the fender; may be required as the build progresses. Please consider the mounts for the sissy bar oil tank battery kickstand and rear fender mounts during the build these are available separately. Always pre-build first dissaemble then complete the final build assuring that all mounts and modifications are set before painting. For the experienced builder: Frame can be set up for 1957-1985 type Ironheads or Evolution engines and can be modified to use mechanical brakes.
Measurements: Fender Cross Bars OD: 1 inches
Tech Notes: Suggested to use with #40-9008 XL Round Oil Tank Chrome Suggested to use with #40-9009 XL Round Oil Tank Raw Suggested to use wtih #31-1892 Oil Tank Mount Bracket Required to use with #51-0389 XL Brake Shaft Tube Suggested to use with #44-0763 9/16inch Rear Axle Adapter Spacer Set. Suggested to use with #51-0515 Kickstand Frame Mount Universal. *NOTE: UPS may consider this part as packaged inchoversizeinch for shipment as compared to the actual weight which will result in higher shipping costs.

