Have Questions?
The V-Twin 24-1632 Factory Sample 41mm Fork Slider Assembly is designed for use with 41mm billet or stock-type triple trees. It can also be used on 1948–1984 FL, 1971–1984 FX, 1986–1999 FLST, and 1984–1999 FXST applications. The axle holes pass straight through both sides of the sliders.
For 1984–1999 FXST applications, compatible FXST calipers are required. Installation requires the installer to fabricate the correct axle. Drain the assembly lubricant before use; 20-weight fork oil is recommended for average conditions, with 10.2 fluid ounces specified per fork leg. The total assembly length is 35-3/8 inches.
This factory sample is a brand-new pre-production part that may have cosmetic surface imperfections, installation-test marks, or fitment-test marks. These samples do not have physical defects such as cracks or holes. Before installation, inspect threaded and bearing holes for excess plating. The V-Twin 24-1632 is suggested for use with the #24-0230 1-inch Taper Bearing Neck Conversion Kit.
Features:
- Application: 41mm fork sliders for compatible FL, FX, FLST, and FXST applications, plus billet or stock-type 41mm triple trees
- Axle Design: Axle holes pass straight through both sides
- Installation Requirement: Installer must fabricate the correct axle
- FXST Requirement: 1984–1999 FXST applications require FXST calipers
- Fork Oil: 10.2 fluid ounces per leg; 20-weight oil recommended for average conditions
- Sample Condition: Brand-new pre-production parts may have cosmetic finish imperfections and installation-test marks
- Inspection Note: Check threaded and bearing holes for excess plating before installation
- Total Length: 35-3/8 inches
- Suggested Component: V-Twin #24-0230 1-inch Taper Bearing Neck Conversion Kit
- Accessory Items: 41-0050 - Oil Change Kit, 31-0933 - Inspection Tag Holder 1/2 inch Mount Black, 16-0529 - Mini Motorcycle Lift Tool, 16-0158 - Primary Inspection Plug Wrench Tool
| UOM: SET |
| Country Of Origin: TAIWAN |
| Accessory Items: 41-0050 - Oil Change Kit 31-0933 - Inspection Tag Holder 1/2 inch Mount Black 16-0529 - Mini Motorcycle Lift Tool 16-0158 - Primary Inspection Plug Wrench Tool |
| Tech Notes: Suggested to use with #24-0230 1inch Taper Bearing Neck Conversion Kit |
| Measurement: Total Length: 35-3/8 inches |
