Have Questions?
The V-Twin 51-0096 Replica Retro Straight Leg Rigid 30 Rake Frame is supplied with a seat post, a transmission mount plate for a 4-speed transmission, and a rear axle. It accepts Panhead, Shovelhead, Evolution, and Twin Cam engines, with a tin inner primary required. The frame also accepts 1986–1999 FXST gas tanks and chain final drive, and is designed for use with Softail-type transmissions.
This rigid frame features a 2-inch raised neck and 9-1/8 inches between the axle plates. It is taller in the engine compartment to accommodate Evolution and Twin Cam motors and accepts a 140mm rear tire. Rigid-mount 5- and 6-speed transmissions can be used with aluminum inner and outer primaries; check the transmission plate height for correct primary alignment. The frame is also configured to accept mechanical brakes and includes a brake cross shaft and stock rear axle plate for use with a star hub wheel and mechanical brakes.
Tech notes: The seat post tube has a bend for Evolution or Twin Cam motors and may need to be shortened while remaining connected to the lower frame bracket. The seat post may require additional reaming for proper fit. The frame may require modification to the motor mount holes for alignment and front rocker box clearance. Pre-assembly with the inner primary, transmission, and rear mount adapter is suggested for TC-88-type motors. No serial numbers are stamped on the replica frame; V-Twin supplies a bill of sale referencing part number 51-0096. Suggested front seat mount: 31-0913, which mounts to two dowels between the tank to connect the seat T.
Features:
- Frame Type: Replica retro straight leg rigid frame with a 30-degree rake
- Included Components: Seat post, 4-speed transmission mount plate, rear axle, brake cross shaft, and stock rear axle plate
- Engine Fitment: Accepts Panhead, Shovelhead, Evolution, and Twin Cam engines
- Transmission Fitment: Designed for Softail-type transmissions and rigid-mount 5- and 6-speed transmissions
- Gas Tank Fitment: Accepts 1986–1999 FXST gas tanks
- Rear Tire Clearance: Accepts a 140mm rear tire
- Brake Configuration: Accepts mechanical brakes and supports use with a star hub wheel
- Construction Details: Features a 2-inch raised neck and 9-1/8 inches between the axle plates
- Installation Notes: May require seat post reaming and modifications to motor mount holes for alignment and front rocker box clearance
| UOM: EA |
| Country Of Origin: TAIWAN |
| Accessory Items: 22-0668 - Parkerized Brake Control Kit Mechanical 38-0120 - Bobbed 3.5 Gallon Gas Tank Set 51-0097 - Replica Retro Wishbone 30 Rake Frame |
| Tech Notes: Suggested to use #31-0913 Front Seat Mount which mounts to t wo dowels between the tank to connect the seat T. *NOTE: If you are using a seat post remember the seat post tube has a bend in it to accept the Evolution or Twin Cam motors. It will be necessary to shorten the tube portion of the seat post but still connect the rod to lower frame bracket. *NOTE: Seat post may require further reaming for proper fit. *NOTE: There are no serial numbers stamped on the replica frame. V-Twin supplys a Bill of Sale only referencing the part number. *NOTE: UPS may consider this part as packages inchoversizeinch for shipment as compared to the actual weight which will result in higher shipping costs. Frame may require modification to the motor mount holes for correct alignment and for clearance in the front rocker box area. Suggested to pre-assemble with inner primary transmission and rear mount adapter on TC-88 type motors. |
