Have Questions?
The V-Twin 51-1939 Replica HM Knucklehead 28° Rake Frame is designed to accommodate Knucklehead or Big Twin Flathead engines with a 3- or 4-speed transmission. The frame features a horizontal crossbar made from 7/8-inch outside-diameter tubing and includes a seat post, mechanical brake cross shaft, rear axle assembly, transmission plate, and motor alignment plate for shipping support.
Updated replica details include forged components marked with forging hallmarks. Forged parts include the neck, front and rear motor mounts, yoke, sidecar loops, and rear axle plates. The rear brake slot on the left rear axle plate is intentionally closed and may be cut out at the front by the builder for an original-style appearance. Cross shaft bushings, a seat post bushing, a vertical toolbox mount bracket, and grease fittings are pre-installed.
Fitment includes 1938, 1939, and 1940 Harley-Davidson EL and UL models. The frame requires the purchase of clamp-on coil bracket kit 49-0099. Some holes may require slight reaming or filing during assembly, and the seat post and cross shaft bushings may require additional reaming for proper fit. Mount the seat to the frame before installing gas tanks, placing a #6320 washer between the tank and frame tab. This replica frame has no stamped serial numbers; V-Twin supplies a bill of sale referencing SKU 51-1939.
Features:
- Engine and Transmission Accommodation: Designed for Knucklehead or Big Twin Flathead engines with 3- or 4-speed transmissions.
- 28° Rake Frame: Replica Knucklehead frame design with a 28-degree rake.
- Crossbar Construction: Horizontal frame crossbar uses 7/8-inch outside-diameter tubing.
- Included Frame Components: Includes seat post, mechanical brake cross shaft, rear axle assembly, transmission plate, and motor alignment plate.
- Forged Components: Includes hallmarked forged neck, front and rear motor mounts, yoke, sidecar loops, and rear axle plates.
- Pre-Installed Components: Cross shaft bushings, seat post bushing, vertical toolbox mount bracket, and grease fittings are pre-installed.
- Assembly Notes: Requires clamp-on coil bracket kit 49-0099; some holes and bushings may require reaming or filing for proper fit.
- Replica Identification: No serial numbers are stamped on the replica frame; V-Twin supplies a bill of sale referencing SKU 51-1939.
- Fitment: Fits 1938, 1939, and 1940 Harley-Davidson EL and UL models.
Fitment:
Harley Davidson EL 1938
Harley Davidson EL 1939
Harley Davidson EL 1940
Harley Davidson UL 1938
Harley Davidson UL 1939
Harley Davidson UL 1940
| UOM: EA |
| Country Of Origin: TAIWAN |
| Accessory Items: 24-0121 - Zinc Fork Neck Cup Set with Races 51-0068 - Rigid Frame Forging Hallmark Plate 9629-2T - Rear Chain Adjuster Parkerized 22-0668 - Parkerized Brake Control Kit Mechanical |
| Tech Notes: Requires purchase of clamp on coil bracket kit #49-0099. In some instances it may be necessary to ream or file holes slightly in order to assemble parts onto the frame. *NOTE: Includes a Replica Vertical Tool Box Mount Bracket. *NOTE: Replica inchHMinch is our updated version with forging hallmarks on many of the components. *NOTE: Features the following forged parts with HallMark numbers and marks: seat yoke front motor mount side car loops rear axle plates and transmission front/rear mounts. *NOTE: Mount Seat inchTinch to frame before installing gas tanks. Place #6320 washer between the tank and frame tab before mounting. *NOTE: Seat post and cross shaft bushings may require further reaming for proper fit. *NOTE: There are no serial numbers stamped on the replica frame. V-Twin supplys a Bill of Sale only referencing the part number. |
