Have Questions?
The V-Twin 49-2400 18-inch Inline Spring Fork Assembly in black is designed for 1936–1945 Harley-Davidson WL models. The assembly includes inner and outer springs, front and rear legs, inside rockers for a 3/8-inch axle, a spring rod with bushings, and an internal brake wheel with studs and bushings. Some assembly may be required.
The rear legs feature 1-inch tubes tapped 3/4-inch-16 to accept a threaded riser bushing set. With this installed, the builder can use a triple tree without ears and select a post riser set. The stem is 7/8 inch, and the rockers measure 6.5 inches apart. The assembly accepts a 3/4-inch axle for custom applications, and the non-offset rockers are mounted inside the fork. Suggested use is with the V-Twin 49-1963 WL Front Axle Black.
Top clamp, neck races, and cone nut are not included. The assembly is produced through tubing, swaging, investment casting, forging, welding, brazing, polishing, chrome, paint, spring winding, machining, drilling, and packaging processes. The stated 18-inch measurement is taken from the triple tree area where the stem and lower bearing sit to the axle position. Always verify the required length and installation requirements for your application.
Features:
- Application: Fits 1936–1945 Harley-Davidson WL models.
- Assembly Contents: Includes inner and outer springs, front and rear legs, inside rockers, spring rod with bushings, and internal brake wheel with studs and bushings.
- Axle Compatibility: Rockers are for a 3/8-inch axle; the assembly also accepts a 3/4-inch axle for custom applications.
- Riser Preparation: Rear-leg tubes are tapped 3/4-inch-16 to accept a threaded riser bushing set.
- Stem: Uses a 7/8-inch stem.
- Rocker Spacing: Rockers measure 6.5 inches apart.
- Measurement: Length is 18 inches, measured from the triple tree area to the axle position.
- Not Included: Top clamp, neck races, and cone nut are not included.
- Installation: Some assembly may be required.
- Suggested Use: Suggested to use with V-Twin 49-1963 WL Front Axle Black.
Fitment:
Harley Davidson WL 1936
Harley Davidson WL 1937
Harley Davidson WL 1938
Harley Davidson WL 1939
Harley Davidson WL 1940
Harley Davidson WL 1941
Harley Davidson WL 1942
Harley Davidson WL 1943
Harley Davidson WL 1944
Harley Davidson WL 1945
Harley Davidson WL 1946
Harley Davidson WL 1947
Harley Davidson WL 1948
Harley Davidson WL 1949
Harley Davidson WL 1950
Harley Davidson WL 1951
Harley Davidson WL 1952
| UOM: EA |
| Country Of Origin: TAIWAN |
| Suggested Items: 49-1762 - 18 inch Spring Fork Assembly Black 37-0862 - Black Hex Nuts 7/16 inch-20 49-0528 - Spring Fork Rocker Kit |
| Accessory Items: 52-0758 - 18 inch x 2.15 inch Front Wheel Assembly 52-0757 - 16 inch x 3.00 inch Front Wheel Assembly 49-0062 - Fork Rocker Set Black 44-0543 - Chrome Rear Axle Adjuster Block Set |
| Tech Notes: Suggested to use with #49-1963 WL Front Axle Black. *NOTE: 45inch Spring Fork rockers are mounted to the inside of the fork and utilize a 3/8inch axle. 45inch Servi-Cars 1947-1957 use Big Twin rockers on the outside of the fork. How we measure Spring Forks. NOTE: Measurement is from the triple tree where stem and lower bearing sits to the axle position. This is the effective length as it is the legnth from the lower bearing cup on the frame to axle. Installer can slide a pipe or solid bar thru the bearing cups and measure the length that may be needed for the desired frame height. This Spring Fork assembly accepts a 3/4inch axle for custom applications. As rockers are not offset (as on replica Spring Forks). 1inch stem utilized tapered bearings for ease of installation. |
| Measurement: Length: 18 inches |
