Have Questions?
The V-Twin 51-0097 Replica Retro Wishbone 30-Degree Rake Frame includes a seat post, transmission mount plate for a 4-speed transmission, and rear axle. It accepts Panhead, Shovelhead, Evolution, and Twin Cam engines, though a tin inner primary is required. The frame also accepts 1986–1999 FXST gas tanks and chain final drive.
This rigid frame features a 2-inch raised neck and 9-1/8 inches between the axle plates. It is taller in the engine compartment to accommodate Evolution and Twin Cam motors and can also be used with rigid-mount 5- and 6-speed transmissions. The frame accepts a 140mm rear tire and is supplied with a brake cross shaft for mechanical brakes and a stock rear axle plate for use with a star hub wheel and mechanical brakes.
For solid-mount TC-88 engines, a steel motor mount is available separately. The frame may require modification to the motor mount holes for proper alignment and clearance in the front rocker box area. Pre-assembly with the inner primary, transmission, and rear mount adapter is suggested for TC-88-type motors. The seat post tube may require shortening, and further reaming may be necessary for proper fit. This replica frame has no stamped serial number; V-Twin supplies a Bill of Sale referencing part number 51-0097. Suggested fitment includes Front Seat Mount 31-0913, which mounts to two dowels between the tank to connect the seat T.
Features:
- Frame Type: Replica retro wishbone rigid frame with a 30-degree rake.
- Included Components: Seat post, 4-speed transmission mount plate, rear axle, brake cross shaft, and stock rear axle plate.
- Engine Acceptance: Accepts Panhead, Shovelhead, Evolution, and Twin Cam engines.
- Transmission Acceptance: Can be used with rigid-mount 5- and 6-speed transmissions.
- Fuel Tank Acceptance: Accepts 1986–1999 FXST gas tanks.
- Final Drive: Accepts chain final drive.
- Rear Tire Clearance: Accepts a 140mm rear tire.
- Engine Compartment: Taller design accommodates Evolution and Twin Cam motors.
- Fitment Notes: May require motor mount hole modification, front rocker box clearance work, seat post shortening, and further reaming for proper fit.
- Seat Mount Recommendation: Suggested for use with Front Seat Mount 31-0913.
- Documentation: Replica frame has no stamped serial number; V-Twin supplies a Bill of Sale referencing part number 51-0097.
- Accessory Items: 51-1080 - Replica HM Wishbone Frame, 51-0096 - Replica Retro Straight Leg Rigid 30 Rake Frame, 51-0077 - 45 Frame and Tank Kit
| UOM: EA |
| Country Of Origin: TAIWAN |
| Accessory Items: 51-1080 - Replica inchHM inch Wishbone Frame 51-0096 - Replica Retro Straight Leg Rigid 30 Rake Frame 51-0077 - 45 inch Frame and Tank Kit |
| Tech Notes: Suggested to use with #31-0913 Front Seat Mount which mounts to two dowels between the tank to connect the seat T. *NOTE: If you are using a seat post remember the seat post tube has a bend in it to accept the Evolution or Twin Cam motors. It will be necessary to shorten the tube portion of the seat post but still connect the rod to lower frame bracket. *NOTE: There are no serial numbers stamped on the replica frame. V-Twin supplys a Bill of Sale only referencing the part number. *NOTE: UPS may consider this part as packages inchoversizeinch for shipment as compared to the actual weight which will result in higher shipping costs. *NOTE: Seat post may require further reaming for proper fit. |
