Have Questions?
The V-Twin 51-0920 Weld-On Frame Hardtail is designed for DIY hardtailing and features an alignment accomplished through the provided mount design. Welding should be performed by a skilled welding technician. Before final welding, align the weld-on unit to provide proper chain clearance.
The distance between the inside surfaces of the axle plates is 9-1/8 inches, with 7/8-inch axle slots on both sides. The tail section width should be exactly 9-1/8 inches; slight variation may occur due to the welding process, and the builder may need to modify the section accordingly. Fitment is for DIY hardtail frame construction where the applicable frame dimensions and welding requirements are met.
V-Twin part number 51-0920 is supplied as an individual unit. Professional welding and careful alignment are recommended during installation.
Features:
- Installation: Weld-on frame hardtail designed for DIY hardtailing.
- Alignment: Mount design helps accomplish alignment during installation.
- Welding: Welding should be performed by a skilled welding technician.
- Chain Clearance: Align the weld-on unit for chain clearance before final welding.
- Axle Plate Spacing: 9-1/8 inches between the inside surfaces of the axle plates.
- Axle Slots: 7/8-inch slots on both sides.
- Tail Section Width: Intended to be exactly 9-1/8 inches; welding-related variation may require builder modification.
- Accessory Items: 51-0781 - Replica Hardtail Rear Frame Section, 51-0466 - Big Twin Hardtail Frame, 51-0823 - Rigid Hardtail Rear Frame Section, 51-0457 - Replica Frame Hardtail
| UOM: EA |
| Country Of Origin: TAIWAN |
| Accessory Items: 51-0781 - Replica Hardtail Rear Frame Section 51-0466 - Big Twin Hardtail Frame 51-0823 - Rigid Hardtail Rear Frame Section 51-0457 - Replica Frame Hardtail |
| Tech Notes: The width of the tail section should be exactly 9-1/8inch. Due to the welding process this may vary slightly & builder will need to modify accordingly. |
