Have Questions?
The V-Twin 51-1942 Replica Knucklehead 29 Rake Rigid Frame features a rear fender crossbar supported by brazed connections at each end. Its 29-degree neck angle accepts inline spring forks. The frame includes the seat post assembly, transmission mount plate, and installed rear axle kit. The toolbox is welded to the frame.
This replica frame is designed for 1941–1946 Harley-Davidson FL models and 1941–1944 Harley-Davidson EL models. The frame requires purchase of a clamp-on coil bracket kit. Mount the seat T to the frame before installing gas tanks, and place a 6320 washer between the tank and frame before mounting. Seat post and cross-shaft bushings may require further reaming for proper fit; for this reason, frames will not be accepted for return.
The updated replica version features forging hallmarks on many components, including the seat yoke, front motor mount, sidecar loops, rear axle plates, and transmission front and rear mounts. No serial numbers are stamped on the replica frame. V-Twin MFG supplies a Bill of Sale referencing part number 51-1942. Suggested companion items include the V-Twin 31-0406 Tool Box Two Hole Cross Bracket and 31-0412 Replica Tool Box Cross Bracket. OEM cross references are 47003-41 and 2802-41.
Features:
- Frame Type: Replica Knucklehead 29 rake rigid frame
- Neck Angle: 29 degrees for inline spring forks
- Included Components: Seat post assembly, transmission mount plate, and rear axle kit
- Rear Fender Support: Rear fender crossbar brazed at each end
- Toolbox: Welded to the frame
- Forged Components: Seat yoke, front motor mount, sidecar loops, rear axle plates, and transmission front and rear mounts feature hallmarks
- Installation Note: Requires a clamp-on coil bracket kit
- Documentation: Bill of Sale supplied by V-Twin MFG; no serial numbers are stamped on the replica frame
- OEM Cross Reference: 47003-41 and 2802-41
- Fitment: 1941–1946 Harley-Davidson FL and 1941–1944 Harley-Davidson EL models
Fitment:
Harley Davidson EL 1941
Harley Davidson EL 1942
Harley Davidson EL 1943
Harley Davidson EL 1944
Harley Davidson EL 1945
Harley Davidson EL 1946
Harley Davidson FL 1941
Harley Davidson FL 1942
Harley Davidson FL 1943
Harley Davidson FL 1944
Harley Davidson FL 1945
Harley Davidson FL 1946
Harley Davidson U 1941
Harley Davidson U 1942
Harley Davidson U 1943
Harley Davidson U 1944
Harley Davidson U 1945
Harley Davidson U 1946
| UOM: EA |
| Country Of Origin: TAIWAN |
| OEM Cross Reference: 47003-41,2802-41 |
| Suggested Items: 51-0598 - Fender Brace Saddle 51-0603 - Lower Front Gas Tank Mount Set 51-0594 - Knucklehead Seat Mount 51-0731 - Replica Rear Axle Plate Set Raw |
| Accessory Items: 51-0068 - Rigid Frame Forging Hallmark Plate 51-0030 - Bull Neck Knucklehead Frame 51-1946 - Replica inchHM inch Knucklehead 30 Rake Frame |
| Tech Notes: Suggested to use with #31-0406 Tool Box Two Hole Cross Bracket. Suggested to use with #31-0412 Replica Tool Box Cross Bracket. *NOTE: Replica inchHMinch is our updated version with forging hallmarks on many of the components. *NOTE: Features the following forged parts with HallMark numbers and marks: seat yoke front motor mount side car loops rear axle plates and transmission front/rear mounts. *NOTE: There are no serial numbers stamped on the replica frame. V-Twin MFG supplies a Bill of Sale only referencing the part number. |
